![]() ![]() Acoustics: 4TB/3TB: Idle (typical, bels): 2.3 Operational (typical bels) 2.5 2TB: Idle (typical, bels): 1.9 Operational (typical bels) 2.1.Non-Operating Shock (2ms, max, Gs): 300.Temperature Gradient, Operating/Nonoperating (☌ per hour max): 20/30.Non-operating temperature: -40° to 70☌.Voltage Tolerance, Including Noise (12V): ☑0%.Voltage Tolerance, Including Noise (5V): ±5%.Non-recoverable read errors per bit read: Maximum sustained transfer rate :180MB/s (4TB/3TB), 159MB/s (2TB).Power-On or Standby to Ready (typical, sec): The Seagate NAS HDD comes in 2TB, 3TB and 4TB capacities with a three year warranty. One more significant feature in the NAS market is that the NAS HDD operates at just 1.9 bels (2TB). Seagate also quotes drive performance at 10% more than the competition, which we'll test below. That means at the time of this review that the Seagate NAS HDD offers a greater than 30% capacity advantage over the WD Red NAS hard drive. However, the Seagate NAS HDD has one major advantage from the outset – it is being offered in 2TB, 3TB and 4TB capacities, while the Red started at 1TB and ranged up to 3TB. The Seagate NAS HDD isn't the first drive to market designed specifically for NAS devices the WD Red NAS Hard Drive that we reviewed last year is already available. The drive also features a dual-plane balance to support the weighted motor design, thus reducing vibrations for greater performance and reliability. Its extended error recovery controls ensure compliance with NAS system requirements to achieve greater data integrity, while its advanced power profiles are designed to provide low power options for the 24/7 always-on operation NAS drives endure. NASWorks tunes the drive to operate with performance and reliability. NAS drives need to stand up to demands for NAS error recovery controls, power management features and vibration/shock issues. Seagate also implemented its NASWorks firmware to handle NAS-specific issues that standard desktop HDDs aren't designed to cover. Seagate NAS HDDs have been tested with Drobo, Synology, LaCie, LenovoEMC and many other solutions. To that point, Seagate completed compatibility testing with the top NAS providers to qualify the drive with the market's leading systems. ![]() Seagate wants users to feel completely comfortable buying their NAS and then filling it with their NAS HDDs. Seagate joins the NAS HDD market by designing a drive to handle NAS workload and operational requirements with their NASWorks specialized firmware, three-year warranty and support from many leading NAS vendors. Of course there are loads of drives out there that users could implement to populate a NAS, but most are overkill or otherwise sub-optimal for the need. With the consumer and small office NAS market growing quickly and with buyers usually opting for diskless models, Seagate is responding to market demand with this specific use-case drive. The Seagate NAS HDD is a 3.5" form factor, 6Gb/s SATA interface hard drive that spins at 5,900RPM, ranges up to 4TB in capacity and is specifically engineered to be installed in one to five-bay NAS devices. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |